Tipstir's | ePad Extreme Performance Plus Edition R-ROM MOD 7e20108 | 11/12/10

tipstir

Senior Member
Developer
Aug 4, 2010
1,505
110
40118_459610582948_579882948_5656472_4050323_n.jpg


ePad Extreme Plus means 150% more tweaked performance gain!

75179_457171732948_579882948_5626521_7479179_n.jpg


0.7e updated by tipstir 11/12/10
features Extreme Performance Plus Edition
WMT2.0.0_105 Drivers
Disabled Camera UI
Tweaked more system files to max gain of 150% in performance
Yes Market Works!
Yes 256MB Version
(60 apps included)

------------------------------------------------------------

0.7e updated by tipstir 11/11/10
features Extreme Performance Edition
WMT2.0.0_105 Drivers
Fixed Rotation
Added Updated SetCPU
Added Advanced Task Killer Pro
Tweaked more system files to max gain of 125% in performance
Yes Market Works!
Yes Can be Over Clocked!
(60 apps included)

----------------------------------------------------------------------------------------------------------

0.7e updated by tipstir 11/8/10
features Extreme Performance Edition
WMT2.0.0_105
Fixed boot-up to run faster
Fixed Rotation
Created New boot-up screen logo (shown above)
Remove home screens (except for the default)
Added Screen Suite (shown above in 2nd picture)
Added Memory Booster
Removed Advanced Task Killer Pro
Removed and Added Additional Software
Disabled Bluetooth UI
Disabled Hibernation UI
Disabled PPPOE UI
Disabled 3G UI
Tweaked and Disabled some more features not needed to run
(58 apps included)
Yes Market Works!
Yes 256MB Version!

Hardware | Software Model Requirements
Model Supported: flytouch ePad / ePad generic only
Color: Black/Silver
Home Button: Black/Silver
CPU Supported: WM8505
OS Supported: Android v1.6
Builds Supported: 1.7.4, 1.8.2, 1.9_88, 1.9.xx, WMT2.0.0_88, WMT2.0.0_105
RAM Supported: 256MB
Dock Port Supported: 30-pin connection/connector with 2x USB / LAN jack
Camera Supported: No
Bluetooth Supported: No
Hibernation Supported: No
ADSL Supported: No
3G Supported: No
Vibration Supported: No
Over Clock Supported: Yes

Current Download WinInstaller to SDcard
epad_exppscript7e2018.exe

Current Download Manual Install to SDcard Note you'll need to create script folder
epad_exppscript7e2018.zip

Bonus Wallpaper Collection Package (45) to use with the included installed Magic Wall

Download WinInstaller to SDcard
Wallpaper 45.exe

Download Manual Install
Wallpaper 45.zip

---------------------------------------------
0.7c updated by tipstir 11/7/10
features
WMT2.0.0_105
Fixed Build Number 7c20105
Replaced RUDROID with ANDROID
Replaced SetCPU 2.02 with 2.03
Removed and added more apps (68) total

----------------------------------------------
0.7a updated by tipstir 11/5/2010
features
WMT2.0.0_105 drivers replaces WT2.0.0_088 drivers
Updates to apps removed apps

------------------------------------------------
0.6 updated by tipstir 11/5/2010
features
WMT2.088 drivers replaces 1.9_88 drivers
Ad blocking host update as of 10/30/10
Mega PowerTools included
PowerElite 2010 included
PowerDoc 2010 included
A Bunch of apps and games never added
Wallpaper is not included due to the size of this huge file.

----------------------------------------
 
Last edited:
There is WMT2.1.1_105 also WMT2.0.1_88 is available from me on the here. Not tested. I would recommend using any of the ones titled by Tipstir's | ePad xxx R-ROM MOD since they're more stable. Remember they're only tested on Flytouch ePad, nothing else.
 
Would you mind to switch on camera? It´s not like I use it very often, but it´s good to know that one could... or would this make your ROM much slower?
 
This Extreme version of the Extreme Plus has the camera disabled. To free up some more system resources. This one is more for those who want more performance but don't need to use the camera to get that extra performance. If you want to use the camera then use Extreme version. The goal was to get the best boost out of the tablet! Still there is more room to do so but. This is as good as it gets for now well by me! :)
 
I tried both the Extreme Performance & Plus on my Flytouch clone.
They both work - somewhat.
After swapping to another microSD card (My Samsung card was not working), the flashing worked.
And the epad powered up seemingly OK.

Here I hit a couple of problems.
1. I cannot find out how to change the owner's info in the Slide-2-unlock screen.
2. SetCPU appears to be running but opening the included SetCPU works but doing anything results in a Forced close.

Infact, many things gave the forced close message.
But I noticed that the Plus version gives more forced close messages than the non-plus version.
Programs like NewsRoom, ES Explorer failed in the Plus but worked in the non-plus version.

Not all programs trigger the force close message though?
Surprisingly for me, most games like Robo Defense & Farm Frenzy worked fine.

I suspect it may have to do with my CPU being a bit unstable at 400MHz.
I could not get it to stay above 387MHz under Rudroid v0.4

Is there a way to lower the speed a little bit?
I hesitate to ask you to just brew up an slightly slow version.
Perhaps, if there is some settings I can change in the script folder, I would appreciate a pointer as I dip my toes into customizing...
Thanks for reading this.
 
I tried both the Extreme Performance & Plus on my Flytouch clone.
They both work - somewhat.
After swapping to another microSD card (My Samsung card was not working), the flashing worked.
And the epad powered up seemingly OK.

Here I hit a couple of problems.
1. I cannot find out how to change the owner's info in the Slide-2-unlock screen.
2. SetCPU appears to be running but opening the included SetCPU works but doing anything results in a Forced close.

Infact, many things gave the forced close message.
But I noticed that the Plus version gives more forced close messages than the non-plus version.
Programs like NewsRoom, ES Explorer failed in the Plus but worked in the non-plus version.

Not all programs trigger the force close message though?
Surprisingly for me, most games like Robo Defense & Farm Frenzy worked fine.

I suspect it may have to do with my CPU being a bit unstable at 400MHz.
I could not get it to stay above 387MHz under Rudroid v0.4

Is there a way to lower the speed a little bit?
I hesitate to ask you to just brew up an slightly slow version.
Perhaps, if there is some settings I can change in the script folder, I would appreciate a pointer as I dip my toes into customizing...
Thanks for reading this.

Use this setting..

149682_457520937948_579882948_5632356_3356040_n.jpg


Both Extreme work differently The plus remove the camera/video cam features. If you need those then fall back to the Extreme.
If you want to run at 400MHz mark then use the Deluxe that has some tweaks in it also. But not like the Extreme or the Extreme Plus.
There is one before the Deluxe though it has a glitch in it that causes it to load slower at boot-up. I'll work on that one later.
 
Quite a nice rom Tipstir, have to say the thing I most like is the load of apps you give in this rom, instantly you can do like anything with your ePad. So disabling the camera ui speeds up booting ? Nice catch, considering the camera is very,very,very poor and unusable for barcodescanning so I'm not using it anyway. Somehow I dislike disabling features which are available but in this case, considering the speedup benefits, and the poor cam, I'm not sure, I think it's better!.
 
Unfortunately, I could not use the SetCPU to change the settings as it FC!

However, after reading the forums, I finally think I found the culprit!
When flashing the ROMs, I used a 4GB microSD.
The default data microSD card was not used in the flashing process.

I checked and found that my data microSD had a setcpu.txt in the root directory.
Comparing it to the one in the ROM showed it to be different.
On a hunch, I copied the ROM's setcpu.txt onto the microSD card.

Now, it looks like SetCPU does not FC anymore.
Still testing with Extreme Plus....
 
tipstir, Max 387003 and Min 200002 do not work still. The performance boost was felt though even if not overclocked. I even tried editing setcpu.txt to contain only 200002, 387003. It didn't work.
 
Last edited:
tipstir, Max 387003 and Min 200002 do not work still. The performance boost was felt though even if not overclocked. I even tried editing setcpu.txt to contain only 200002, 387003. It didn't work.

The maxed I had use was 250MHz as the min. You have to try what works on your hardware. This optional you can use the 350MHz default. I the only reason why I would change to OC was to get video to play better @ 400x240p FLV.
 
Hi Guys, I have a Generic Flytouch tablet with Build: WMT2.0.1_88, Firmware:1.6 and after a few times using it, it bricked. I just ran the beta version of the Rom 2.0.1_88 and the tablet went through most of the update and is now locked at file system update. What is the problem and why is it not finishing? Please help me.

Thanks Tim,
 
Back
Top