[ROM] Blue Water - Kyros MID 8027 - MPMAN 827 - Mediox MID8027

[ramses2226]

Thanks insanewolf let me look for driver

 

[ramses2226]

Good morning Again Insanewolf,

Please kindly find following received from coby

https://www.dropbox.com/sh/0zx3lmygsfrzo6g/8Upwymhkbs

Please kindly confirm if you can issue new blue water v.2 for my tablet, I'am very insterested

Many thanks on before hand
Best regards
Ramon

 

[ramses2226]

Other question Insanewolf,

Just in case I'd like to put original rom, I don't understand what does it mean on .txt file 'please use the T-card if you want to update the FW.'

means SD card and the same installation procedure as bluewater?

Thanks

 

[ramses2226]

Insanewolf,

Can I change 'goodfix' file from original rom to bluewater file and install again, screen will run??

 

[ramses2226]

Insanewolf,

Can I change 'goodfix' file from original rom to bluewater file and install again, screen will run??

It doesn't run, maybe there is another way

 

[ramses2226]

InsaneWolf,

Look also below link as per Coby Germany is original FW (Firmware), can you do blue water v2 for my tablet. thanks
www.digitest.de/coby-support/download/mid8027.rar

Actually my tablet touch screen is not responding, then I use like paperweight

 

[ramses2226]

Insanewolf any news??

 

[simpy123]

Hi, I have been suffering from the screen not working since upgrading to bluewater - thing is I have got this working, I have done that much I can put my finger on what the fix was. Thing is if some can advise me what files to pull of my working touch screen I can share. I have a Coby Kyros 8027 (capacitve

 

[phn]

Hi, I have been suffering from the screen not working since upgrading to bluewater - thing is I have got this working, I have done that much I can put my finger on what the fix was. Thing is if some can advise me what files to pull of my working touch screen I can share. I have a Coby Kyros 8027 (capacitve

I have the same problem. I'm restoring firmware. I would appreciate your help!!!

 

[phn]

I have the same problem. I'm restoring firmware. I would appreciate your help!!!

I've restored the firmware and again I'm getting that problem... I'll try with the german version...

 

[simpy123]

Hi, I have shared the files from my working bluewater https://www.dropbox.com/sh/jpex6ycvqo5bkcg/Qq1IzUOlet - I used the HPUSBDisk.exe software to fast format my SDCARD (windows formatting did not allow the device to read the files), then just copy all the files in the bluewater folder. Once I did the power on + sound down button the tab ran through and the screen press is working.

 

[phn]

Should I install these files adding the bluewater files? Or just installing YOUR files?
EDIT: I copied the files to the original "BlueWater" folder and then flashed. Still with same problem.

 

[simpy123]

Hi, these are the zipped up version of the files http://dl.dropbox.com/u/26954859/coby/bluewater.rar - just unzip all these files to the root of the DS Card. Thing is I tried so many things I am not sure which one thing fixed it. I would suggest you try installing a few times. If someone could advise me how to capture a snapshot of my working device to create a rom you could try running that.

 

[phn]

Ok, I'll try those files! Could you tell me which things did you do to fix it? I mean... Did you use ClockWorkMod Recovery? Because I don't know what else I should do! And thanks a lot, I really appreciate your efforts!
I've flashed it three times with your zip and the problem is still here... Don't know what to do... Thanks to everybody!

 

[Poulsen]

nice work InsaneWolf I just got me a coby kryos mid 8027, and wanted to put bluewater on it everything went fine, and it works, I only have one problem, it shuts down often, but very randomly, is there anybody who know how to fix it ? thx.