Yur4ik1990
Member
- Jan 22, 2012
- 4
- 0
I do not have the firmware file u-boot_overclock.bin where to take it?
Does this rom work on my kyros 1024? I'm working with Gingerbread 1.5 EVO HC theme. Which do you think is better
I do not have the firmware file u-boot_overclock.bin where to take it?
Hi, please tell me, whats is firmware's default resolution (or dpi)? I missed that point after fresh installation of this firmware and now it seems to me, some installed application reduced resolution a bit (it's 160 now according to lcd). It is seen even on loading screen (bigger logo) and moreover - on desktop. I liked the original resolution a lot: convenient, pretty and so on
After reading this entire thread, I tried the following:
-install OFW from coby website
-re-format sd card with SDformatter
-install 1.2
-issue still exists with battery status not available and no buttons working (including power button) but all soft buttons are lit up and do not go out; otherwise it still seems to work ok
Any suggestions?
Everything works fine on OFW? If yes, then try installing an older version of CFW. Also if you didn't use "WIPE_DATA" you may need to activate it in order to do a complete system files update.
Hi, I'm testing the v1.3 on a Kyros 8024, but my accelerometer axis are flipped, when a move in the x axis it move as a y axis...
Already try modify build.prop like:
sensor.accelerometer.flip_xy=1
sensor.accelerometer.invert_x=1
sensor.accelerometer.invert_y=1
sensor.accelerometer.invert_z=1
but no changes..... anyone has the same problem ?
Thanx
I remember a menu in the settings to adjust the accelerometer to the "old" method. Might want to try that. Sorry I can't be more specific, don't have the unit with me at the moment.
I had some strange problems with screen orientation after installing with a class 2 SD card. Ensure the sd card you are using is between class 4 and class 10.