Hi flxrms. Thanks for your efforts. The truth is that I don`t know anything about android, this kyros is my first android tablet. So I don`t know if it's possible with this version of the software, or if that capabilities are only available with gingerbread. Your rom would be more than perfect for me, if it have the ability to install TTS voices, and if I could connect via pptp. That is, rather than apps, what I really need is that in settings, I can acces "voice input & output", and vpn configuration. All I know is I'm asking a lot. No matter if not possible what I am asking, your rom will be my favorite one, because its advantages. Thanks again.
MID7024 "Official" and Custom ROMs
- Thread starter elemist2
- Start date
Hmm google translate?
You only need uboot.bin of original 8024 firmware. Delete the other 4 files and you can use my firmware.
Sent from my Coby Kyros 7024
if you use the android market you can try Steeve suggestion on how to have FULL MARKET ACCESS http://www.androidtablets.net/forum...hread-add-your-custom-roms-12.html#post135366
No need to use titanium backup..just go to manage application->market-> clear data
does it matter if my internal memory is the 2gb instead of the regular 512mb? u know how u have the option of making it 1gb or 2gb i chose the 2g i wonder if it gives me a lower score on antutu benchmark cause i got 3121 score on the benchmark it is running at 1.149mhz... i havent seen much change on my battery life it still last a pretty good amount of time maybe cause i dont use it as much as you guys since i only use it for browsing and youtube
nope it doesnt matter...well it matters if your installing lots of app..normally android 2.2+ will install part of the application on your sdcard..
if you look at your settings->application->manage application->on sd card.. you can see the list of apps installed in your sdcard.. you can now actually move it back to your phone if you want.
jmv_10
Senior Member
- Jun 13, 2011
- 12
- 8
I could install without any inconvenience to flxrms version, with the tips mentioned by my kyros flxrms 8024,.
The operation is only right that achieves operating the location in google maps 1once, and then not work for me anymore so far.
regards
And many thanks for helping flxrms
The operation is only right that achieves operating the location in google maps 1once, and then not work for me anymore so far.
regards
And many thanks for helping flxrms
I bricked my Coby MID 8024 AGAIN!!! :-(
But, only a "SOFT" brick not a "HARD" brick.)
SOFT=SOFTWARE ONLY FIX
HARD=HARDWARE ONLY FIX
I tried the ROM "CFW-7024-V2.rar" from "flxrms", and it "soft" bricked my MID8024. :-(
I first dumped the stuff to the root, then deleted 4 files: "u-boot-SD.bin", "u-boot.arg", "set_bootargs", and "uboot.bin".
I then added the file "uboot.bin" from the original file "MID8024-Firmware.zip".
Went into "normal" recovery mode and it flashed the ROM and shut off the 8024.
When I turned on the 8024 again I found out that it was indeed "soft" bricked again. :-(
Of coarse, I knew what to do. Follow steps on this post:
http://www.slatedroid.com/topic/21821-guide-reviving-your-tablet-in-windows/
And the Coby gave me the "White Screen Of Death" again. Fun. I dumped the original 8024
ROM on the SD and am now running again.
BTW, I used HxD Editter 1.7.7.0 instead of Winimage.
Did I do something wrong??
If you own a MID8024 do not use the "CFW-7024-V2.rar" ROM you might brick it.
I have "soft" bricked my 8024 at least 4 times and "hard" bricked it once(one time is enough),
so I was prepared for it.
Wait, until others have tested these ROM's on the SAME model number as yours or be ready to say goodbye
to your Coby.
Bye...
Arlic
But, only a "SOFT" brick not a "HARD" brick.
)SOFT=SOFTWARE ONLY FIX
HARD=HARDWARE ONLY FIX
I tried the ROM "CFW-7024-V2.rar" from "flxrms", and it "soft" bricked my MID8024. :-(
I first dumped the stuff to the root, then deleted 4 files: "u-boot-SD.bin", "u-boot.arg", "set_bootargs", and "uboot.bin".
I then added the file "uboot.bin" from the original file "MID8024-Firmware.zip".
Went into "normal" recovery mode and it flashed the ROM and shut off the 8024.
When I turned on the 8024 again I found out that it was indeed "soft" bricked again. :-(
Of coarse, I knew what to do.
Follow steps on this post:http://www.slatedroid.com/topic/21821-guide-reviving-your-tablet-in-windows/
And the Coby gave me the "White Screen Of Death" again. Fun. I dumped the original 8024
ROM on the SD and am now running again.
BTW, I used HxD Editter 1.7.7.0 instead of Winimage.
Did I do something wrong??
If you own a MID8024 do not use the "CFW-7024-V2.rar" ROM you might brick it.
I have "soft" bricked my 8024 at least 4 times and "hard" bricked it once(one time is enough),
so I was prepared for it.
Wait, until others have tested these ROM's on the SAME model number as yours or be ready to say goodbye
to your Coby.
Bye...
Arlic
jmv_10
Senior Member
- Jun 13, 2011
- 12
- 8
Here I leave the rom that uses my kyros I 8024 is the portable version of the custom rom "CFW-7024-V2.rar", all credits are for flxrms!
https://rapidshare.com/files/627859604/CFW-8024-V2.rar
regards
https://rapidshare.com/files/627859604/CFW-8024-V2.rar
regards
Last edited:
Cool.......its not bricked...cool. Now I have to add the 8G sd card and use the mbr files for more space on this thing.
BTW, what did you change to get it to work?? Also, did anyone (7024/1024/8024) get a gingerbread rom to work yet??
Just wondering.
Thanks jmv_10 you rock.
Bye...
ToM
